Description
Piedmont Style D Grooved Coupling With 316 SS Hardware + SB Nuts
Style D couplings incorporate the more noble, duplex-alloy construction, which although initially more expensive, offers the superior corrosion resistance and corresponding better longevity for highly corrosive environments compared to the Style B coupling which is constructed from 316 alloy.
Duplex stainless steel is highly resistant to chloride corrosion because of its metallurgy and microstructure. Used for high pressure couplings for seawater installation our duplex alloy is made of two metallurgical phases with each their role to play in the efficiency of the couplings.
Austenite for nobility
Ferrite for strength
The two phases are homogenized to form a metallic composite analogue to epoxy/glass composite. Our duplex is highly resistant to corrosion and offers twice the tensile and yield strength compared to stainless steel 316. Our duplex alloy is CE8MN and offers better mechanical properties when compared to conventional 316L stainless steel.
Featured Highlights:
Pressure Rating 1200 psi (82 bar) with schedule 40s pipe (special alloys) with cut groove only – all sizes.
Duplex or SuperDuplex* stainless steel type CE8MN, conform to ASTM A995 Grade 2A. Piedmont also offers this coupling style in CE3MN (Grade 5A) for even higher corrosion resistance
EPDM rubber gasket, suitable for hot and cold water service. NSF/ANSI 61 approved for drinking water system components. Not suitable for petroleum service.
Nuts and bolts are Round-head, square-neck, type 316 stainless steel bolts and heavy hex nuts conform to ASTM F-593 and 594, Group 2, condition CW.
Sizes are 3/4″- 12″ Nominal size pipe.
Duplex Duplex stainless steel is highly resistant to chloride corrosion because of its metallurgy and microstructure. Used for high pressure couplings for seawater installation our duplex alloy is made of two metallurgical phases with each their role to play in the efficiency of the couplings.
Austenite for nobility
Ferrite for strength
Note: Working pressure ratings based upon generally accepted pressure piping design standards and testing in accordance with ASME Section VIII Division 1 pressure vessel test method.
MFPN: D0150-C-BTSS-SB-SS
Part Number* is created using the Style (D) + Size (0150) + Type of Gaskets (C) + Type and Material of Bolts (BTSS) + Nut (SB) + Washer (SS)
Standard Silicon-Bronze Nuts for sizes D0.75″ up to D3″
Piedmont Style D Grooved Coupling Technical Information
Piedmont Style D Grooved Coupling Product Sheet
Piedmont Style D Grooved Coupling Technical Drawing
Piedmont Style D – STP | CAD Drawing File for 1.5″ – Compressed File .ZIP