Description
Technical datasheet for CPA6-LD
Specified Performance
Permeate Flow: 7,300 gpd (27.6 m3/d)
Salt Rejection: 99.80% (99.6% minimum)
Test Conditions: 1500 ppm NaCl solution
225 psig (1.55 MPa) Applied Pressure
77F (25C) Operating Temperature
15% Permeate Recovery
6.5 – 7.0 pH Range
*The Specified Performance is based on data taken after a minimum of 10 minutes of operation. Actual testing of elements may be done at
conditions which vary from these exact values; in which case, the performance is normalized back to these standard conditions. Permeate flow
for individual elements may vary ±20 percent from the value specified.
General Product Description
Configuration: Low Fouling Spiral Wound
Membrane Polymer: Composite Polyamide
Membrane Active Area**: 400 ft2 (37.2 m2)
Feed Spacer: 34 mil (0.86 mm)
Packaging: All membrane elements are supplied with a brine seal, interconnector, and O-rings. Elements are enclosed in a sealed
polyethylene bag containing less than 1.0% sodium meta-bisulfite solution, and then packaged in a cardboard box.
