2″ SCH80 PVC Clamp-on Saddle Signet Installation Fitting for Flow, pH, and ORP sensors.

$180.00

GF+ Signet Flow, pH, and ORP sensor installation fitting for new, or retro-fit, installations on SCH40 or SCH80  2″ diameter PVC pipe.

SKU: 5911.120 Category:

Description

GF Signet PVC saddle type installation fitting is easily retrofit onto existing PVC piping systems. They can be installed in both SCH40 and SCH80 piping. Includes 3 pieces, 1 wedges, top shell, bottom shell and water-tight sealing gasket. Refer to the photo gallery for visual.

For a 2″ – 8″ diameter pipe size, they will require a 1  5/8″ hole saw to drill into the pipe. Configurations are also offered to install pre-assembled with plain end pipe connections.  Each saddle comes with a water tight gasket, as shown in the photos in the gallery that is to be sandwiched between the fitting and the piping, around the 1 5/8″ hole, when assembling the saddle.

Be sure to depressurize and vent piping systems prior to installation. GF signet installation fittings are NSF certified. See here for installation instructions.

Product Spec. Sheet

Manufacturer Georg Fischer Signet
Manufacturer’s part number PV8S020
Type Installation Fitting
Material SCH80 PVC
Nominal Size 2″
Connections Socket

Additional information

Weight 2 lbs
Dimensions 4 × 5 × 5 in
Manufacturer Part Number

PV8S020

Diameter

2"

Length

5"

Material - Connection

PVC

Required Hole Size

1 5/8"

Gasket Material

EPDM

Manufacturer Code

159.000.637