Style DS – 10″ – 1000 PSI Rated – Super Duplex Coupling with 316 SS Hardware + Silicon-Bronze nuts

$2,132.45

SKU: DS1000-C-BHSS-SS-SS Category:

Description

Piedmont Style DS Grooved Coupling 316 SS Hardware

Style DS couplings incorporate the more noble, SUPER-duplex-alloy construction, which although initially more expensive, offers the superior corrosion resistance and corresponding better longevity for highly corrosive environments compared to the Style B coupling which is constructed from 316 alloy.

Super Duplex are produced using a super duplex material, which offers even higher corrosion resistance than duplex, and is very similar to alloys 2507 and Zeron 100 which are commonly used for seawater piping. Made of super duplex stainless steel CE8MN alloy, our couplings are austenitic-ferritic stainless steel and highly resistant to chloride stress corrosion. Super duplex grade of stainless also offers higher strength and better mechanical properties than duplex stainless steel As an option, these couplings can be specified with CE3MN super duplex material, which offers a slightly higher Pitting Resistance Equivalent Number (PREN).

Featured Highlights:

Pressure Rating 1000 psi (69 bar) with schedule 40s pipe (special alloys) with cut groove only – all sizes.

Duplex or SuperDuplex* stainless steel type CE8MN, conform to ASTM A995 Grade 2A. Piedmont also offers this coupling style in CE3MN (Grade 5A) for even higher corrosion resistance

EPDM rubber gasket, suitable for hot and cold water service. NSF/ANSI 61 approved for drinking water system components. Not suitable for petroleum service.

Nuts and bolts are Round-head, square-neck, type 316 stainless steel bolts and heavy hex nuts conform to ASTM F-593 and 594, Group 2, condition CW.

Size 10″ Nominal size pipe.

Duplex Duplex stainless steel is highly resistant to chloride corrosion because of its metallurgy and microstructure. Used for high pressure couplings for seawater installation our duplex alloy is made of two metallurgical phases with each their role to play in the efficiency of the couplings.

Austenite for nobility

Ferrite for strength

Note: Working pressure ratings based upon generally accepted pressure piping design standards and testing in accordance with ASME Section VIII Division 1 pressure vessel test method.

MFPN: DS1000-C-BHSS-SS-SS

Part Number* is created using the Style (DS) + Size (1000) + Type of Gaskets (C) + Type and Material of Bolts (BHSS) + Nut (SS) + Washer (SS)

Piedmont Style DS Grooved Coupling Product Sheet

Piedmont Style DS Grooved Coupling Technical Drawing

Piedmont Style DS – STP | CAD Drawing File for 10″ – Compressed File .ZIP

 

 

 

Additional information

Weight 33.46 lbs
Dimensions 13.28 × 15.88 × 2.55 in
Materials

Super Duplex

Nominal Size

10.0"

Gasket Material

EPDM

Diameter

10"

Max Pressure (PSI)

1000 psi

Max Pressure (Bar)

69 bar

Coupling Style

Style DS Super Duplex (CE8MN)